§ 107-35. Monuments and markers.

The developer shall place permanent reference monuments in all subdivisions as required herein. Any monuments or markers that are removed during construction and/or grading of the site shall be placed in original locations by a registered engineer or surveyor at the expense of the person removing them.

A. 

Monuments.

(1) 

Monuments shall be made of precast concrete with a minimum diameter of six inches and a minimum length of 36 inches, and shall be set flush with the finished grade. A brass pin shall be set in the top of each monument and scored or marked to indicate the exact point of crossing of the intersecting lines.

(2) 

Monuments shall be set permanently:

(a) 

At the intersection of all lines forming angles in the boundary of the subdivision or land development; and

(b) 

At the intersection of all street lines.

B. 

Markers.

(1) 

Markers shall consist of magnetic metal pipes or bars at least 36 inches long and not less than 1/2 inch in diameter, and shall be set flush with the finished grade. They shall be scored to indicate the exact point of crossing of intersecting lines.

(2) 

Markers shall be set permanently at all lot corners.